An interesting look at The Hobby

Our own Andy from IPMS St. John's (and recent Peoples Choice winner at our show, with - what else? - A Spitfire!) found this link and forwarded it on to me.

I think this is absolutely brilliant on SO many levels.

When you have an hour, no matter what your age, ESPECIALLY if you are young and new to the Hobby, or even if you are not into the hobby, this will give you pause to think.

http://www.youtube.com/watch?v=FzT3L3gGrew

Watch it, and please comment on your thoughts...

M10 Tank Destroyer - Update October 17, 2013

The IPMS club I belong to is having a Model Show on Sunday, and I have been working on this one alot lately to get it ready.

Quite a few more washes and filters to fade the paint, some pin washes on the highpoints for hilite, pigments for mud on the suspension, some streaking grime on the sides and some streaking rust from the grouser bars on the side and from a few of the scratches.

I also tried something new for the spatters on the back and front. I used mud colored paint (enamel  - model master military brown, some white and a touch of yellow) and added plaster of paris to it. This combination doesn't change colour, like pigment does when you dab it with pigment fixer. It might have come out a bit light, but not toooo much out of place.

The aiming rods (red and white) were something I had seen on a TD picture a while ago and wanted to make for this one, for a bit of added colour on an otherwise drab subject. I didn't want to go with the air recognition panel again, that would be overuse, since I am putting the Sherman in the show as well. The 40 link per inch chain adds a nice touch of contrast and distraction I think.

The bedrolls on the side are from Value Gear, same crowd that makes the Sherman rear deck, like on the Sherman. I tried for different colours so that it didn't just blend in and be invisible, and I gave them a good shot of Dullcote when they were done.

Have a look...

M10 Tank destroyer – Update September 16, 2013

This is a representation of an M10 from the Normandy campaign in the summer and fall of 1944. It has the late style counterweights on the rear of the turret, called “Duckbills”, as opposed to the steel wedges that were used in early production, which in itself, was preceded by track cleats (grousers) hanging on the turret rear. The counterweights allowed a balance on the turret to turn the hand crank to traverse the turret. Too much weight on one end would bind the gears and you get no turn, no aim, no fire, no tank/crew left.

It was a delicate balance, what may have worked on flat ground may not work on a hill. The Duckbills could be made smaller and lighter than the wedges, because they protruded farther back on the hull, farther from the center of balance.

As stated in a previous post, this is the Academy kit, and is pretty much built out of the box. I added a few little things like the step up on the transmission cover and the welded rods between the armor plat gromets on the turret sides. The gromits, “things sticking out on the hull” were attachment points for additional armor to be bolted on. They never did produce them or send them overseas, so they weren’t used, but they made great hanging points for the grouser frames, bags, stowage and anything else you want to carry on the outside. When this vehicle became your home and you were it in all the time, there was precious little room on the inside, so most of the “luggage” was carried externally.

The base coat is on, there was two coats of yellow ochre oil paint filter. Next was some chipping using a sponge on the edges and protrusions. Then came some streaking grime all the way around.

Next is some chipping on the flat surfaces using a brush, another coat of grime to the areas that went a bit too light, then I will see what is left to do.

Suspension and tracks need to be weathered and clumps of mud need to be added with pigments and pigment fixer. The wheels need a black wash to show faded rubber on the contact surface. I need to look through my stowage bin and figure out what is going to hang on the sides and rear.

A lot to do yet.

Added treat.

For those who look at post completion weathering as a complete mystery, have a look at this video from Youtube. Mig Jimenez, a renowned modeler and finishing master, has a two hour session on the most effective weathering techniques. You actually get to see him do it. I use this every now and again to get out of a jam, or figure out what to do next.

http://www.youtube.com/watch?v=KqeXw1b7P4g

Update Sherman M4A3 (76mm) Thunderbolt VI - Sept 3/2013

Some incremental updates, biggest one being the painted recognition panel. I still need to weather that to draw out shadows and fading. I also did some tweaking of the chipping, for the spots that were toned down a bit too much by some of the washes. the stowage tarps are still a bit too shiny, so I will have to dull that up a bit too. its not perfect, but I am satisfied with it. I will take these learnings to the next one.

I will probably tweak a few more things, I am enetering this in our IPMS Club show in Oct, but it is time to move on to the M10 Tank Destroyer. Fini.

Aircraft Recognition Panel - I think that's it...

After playing some more with Apoxy Sculpt, using wax paper and flour and an upopened jar of pickles as a rolling pin again, I was able to get a thinner panel. Instead of priming it, I painted the raw Apoxy Sculpt with the Michaels Artists Loft Brilliant Magenta acrylic paint (120ml tube). It took about 4-5 coats, it goes on very thin, but it dries fast, you can paint another coat in less than 30 minutes.

I painted enamel olive drab around the edges to represent the edging of the panel (it has some gromets for line as well). These panels were two sided, with Cerise on one side and White on the other, depending on the Order of the day. There was another panel with Electric Blue and Arc Yellow as well in the kit. (kit in real life, back in the day).

So I made a test one and put it on an old M20 kit I did a few years ago. Today I painted it. I think it looks quite sharp. I built another one now for Thunderbolt VI. Not painted yet.

I just have to thread some string through the bend and tie it on to the lift rings.

Here you go..

Random Updates August 25, 2013

I am just finishing 3 weeks of vacation and got to spend a bit of time with the hobby in between other chores. So before I go back to work..

I was testing a few things and got to practice some painting techniques on some stowage. I put together and painted some US and German jerry cans. I also made myself a little paint chart with colors I have on hand, for when I do paint other stowage items. I would rather go right out of the jar than mix, that way I can repeat much easier when I need to.

I was also trying to figure out how to build an air recognition panel for the back of my WWII AFVs. I tried two methods. One was build with Apoxy Sculpt, the other was to use think aluminum foil. Foil was a none starter, couldn't form it right and paint didn't cover well.

 I used Apoxy Sculpt (2 part apoxy putty) and flattened it as thin as I could with a glass pickle jar -not opened ( I think I can go thinner) and when it dried I painted it. It took a while to find something that I could call Cerise, it is actually Brilliant Magenta. I THINK this is the color they used, but will have to try a few other things yet. This shot is the result of my testing and fooling around.

I made some progress on my M10 Tank Destroyer. I painted the stars where I could and used a decal for the front. I recently bought a jar of chipping fluid and tested that out so that I could use it on this TD. The rear deck gets a lot of wear and tear/scratch traffic, and the side plates get scratches going through the woods. So I decided to chip that since I painted the stars with a Lion Roar stencil. I painted the base color, then sprayed on the chipping fluid, then painted the white (actually light gray) stars. With a Testors brush and some water, I was able to wear away some of the paint. I did better in practice, but with some weathering and other effects, this will look OK.

Shots of chipping practice and the M10. It looks shiny because I Future-d it to put on the front star, the bumps made stenciling improbable, and the bumper codes. I had to make the codes up from a small decal sheet with individual numbers – front and back! It looks mostly lined up J Didn't make up the unit though, 702 TD was attached to 2^nd Armored for the whole European campaign, using M10s up til Jan 45, then they switched to M36 with the 90mm gun.

Not sure why it struck me to dip a Tamiya Willys Jeep in Easy off and start from scratch, but I did it. Who doesn't love a jeep J. This is the third paint job in about 4 years for that particular model. I scrounged through my decal pile to come up with authentic decals for it, and that is where it stands now, and probably will for a while. Next steps would be to paint the details: rear lights, seats, dashboard, etc, then go at the weathering. Should be fun, again!

Lastly my Sherman rear deck stowage came and tonight I painted the base coat. Next up is a coat of future, an overall filter and then some washes/highlights. Still got to put some pigments in the road wheels, and other little touch ups.

And the Sherman Jumbo? Nothing new on that, BUT I wouldn't be surprised to see that get a coat of chipping fluid to build a weathered winter white camouflage, finish all chipped and worn.

That’s enough for now..

More coming, stay tuned.

Update Sherman M4A3 (76mm) Thunderbolt VI - Aug 17/2013

A few minor things to update.
I have added the tow cable and the board across the nose to hold up the Jerry Can and Ration box. I also added pigment with pigment fixer against the lower hulls sides. This stuff drys rock hard and the pigment becomes a permanent part of the model, no mushing or drying up and falling off, even after handling. I will add some pigments to the road wheels as well, and then give it a shot of XF57 Buff overall to blend together. The fixer will allow me to do this. I should have gotten some of that a long time ago.

My Value Gear Sherman Deck accessory is on the way, will add that when it comes (and I paint it).

Some more streaking over the star and Thunderbolt and more storage hanging from the turret.

I also experimented with using Apoxy Sculpt (2 part apoxy putty) to scratch build a recognition panel for the rear, but will have to build a new one when I get my deck piece. OR I can make one out of painted aluminum foil. Will try that too.
This is a fabric panel with the color Cerise, for observation by friendly aircraft. This would have been the WWII version of International Distress Orange. I can make Cerise by mixing Red Blue and White.
This is what it is and where it goes.

Stay tuned....

Update Sherman M4A3 (76mm) Thunderbolt VI - Aug 10/2013

More detail work in this update, seems like the small things take as much time or more than the big things, while hardly noticeable to the average eye :) .

The big thing I have done last night that I have not attempted before is the streaking on the large flat side of a Sherman.

I dabbled with it on the "yellow" Jagdpanther, but taking lessons from Andreas Grewin's fabulous Sherman Jumbo http://modelhobby.eu/2012/10/sherman-m4a3e2-jumbo-king-cobra-completed/ I was able to go further with it by doing almost a whole panel, instead of selective large streaks.

Still a ways to go. I have to put on the big streaks from the overflow of the gas tank refilling cap, and have to do the mud splatters on the running gear, and lower front and back.

No pictures of it, but this morning there are more highlite details with pinwashes around the small details the bogey wheels. I have also cleaned up the tracks a little, adding more mud for consistency where there was little, and I have used my graphite pencil to make the constant contact points of the track/sprocket shiny.

I also toned down the large streaks on the transmission cover, I thought it drew too much attention.

As well,I have a stowage pack for the rear deck coming from Value Gear Models. It looks like this (Manufacturer photo of painted product on an unfinished model).

More to come. Stay tuned ( I am on vacation and getting at this regularly).